Udemy

Free Maritime Carbon Capture Course: Ship Systems, Port Transfer and Feasibility Questions

Capturing carbon dioxide on a ship is only one stage in a longer chain. Gopalakrishnan Veilumuthusamy’s introductory course follows onboard capture through offloading, port reception and storage, then asks what makes the complete arrangement feasible.

Free learning access

Listed as Free on Udemy when checked on 28 October 2026. No coupon or subscription trial is required for the listed lessons. Enrollment needs a Udemy account; availability can change.

About this course

Capturing carbon dioxide on a ship is only one stage in a longer chain. Gopalakrishnan Veilumuthusamy’s introductory course follows onboard capture through offloading, port reception and storage, then asks what makes the complete arrangement feasible.

The February 2026 listing contains six lectures in six sections and 58 minutes. Basic maritime knowledge is helpful but not mandatory; familiarity with decarbonization concepts and an interest in engineering or infrastructure are suggested. The source explicitly says advanced mathematics and engineering are not required.

Official course Maritime Onboard Carbon Capture & Storage (OCCS) Feasibility
Created by Gopalakrishnan Veilumuthusamy
Platform Udemy
Language English
Level All Levels — Udemy listing
Listed duration 58 minutes; 6 lectures across 6 sections
Certificate Not included with a new free enrollment

Skills you’ll gain

  • Recognize capture, liquefaction, transfer and storage as connected stages.
  • Distinguish onboard equipment questions from port and storage-infrastructure questions.
  • Identify cost, energy, safety and scalability as feasibility considerations.
  • Interpret a pilot result as a context-specific report rather than a fleet-wide guarantee.
  • Separate regulatory discussion from permission to install or operate a system.

The first recording introduces the capture system through solvent absorption, regeneration and liquefaction. The next considers ship-to-ship and ship-to-shore offloading. A storage lesson then turns to pipelines and offshore geological formations. This sequence helps explain why a vessel installation depends on facilities and arrangements beyond the vessel itself.

Pilot projects and a regulatory-progress recording precede a longer feasibility discussion. The outline names IMO targets, the EU emissions system and FuelEU Maritime as drivers; these references concern maritime decarbonization policy, not instruction in speculative financial trading. No determination of an actual ship’s compliance or emissions-credit treatment is made by this article.

A public lesson summary names a pilot as Clipper Iris Pro. The manufacturer’s primary case checked on 25 October 2026 instead identifies Solvang’s Clipper Eris and reports roughly seventy-percent capture for that installation. That is a supplier-reported result, not an independently reproduced measurement by Coursya or a universal reduction for every ship. The naming discrepancy is a reason to follow the primary project reference.

The source also refers to a future 2028 safety and certification timeline. A future date in a course summary is not proof that a particular rule is adopted, in force or applicable to a vessel. IMO’s official seminar page describes regulatory-framework development under a work plan and provides technical presentations. Current approved instruments and the relevant authorities must be checked before a real project proceeds.

EMSA’s technology overview published on 13 February 2026, also checked for context, describes several technology categories and differing readiness levels. Alongside the course’s energy-penalty and infrastructure questions, that supports examining the whole chain rather than treating the capture percentage as a complete environmental or commercial assessment. The course is an introduction to feasibility questions, not an installation specification, safety procedure or approved vessel design.

A free desk-based exercise is to sketch a conceptual chain from exhaust capture to final storage and list one unanswered question at each interface. This editorial suggestion requires no laboratory, equipment purchase or operational intervention. No paid simulation package is listed as a prerequisite. Coursya has not inspected a vessel, tested transfer safety, audited a pilot result, performed a financial appraisal or watched every recorded lesson.

IMO onboard-carbon-capture seminar and work context: Primary technical and regulatory-development context, separate from an approval to operate. EMSA technology overview: Official overview of technology categories and readiness differences. Manufacturer’s Clipper Eris case: Check the vessel name and the supplier-reported pilot result directly.

Enroll Now ↗

Related courses for your next step

  • Add a related skillFree E-Fuels Course

    Focus: Distinguish major synthetic e-fuel categories · Connect fuel types with aviation, maritime and industrial uses

    All Levels

  • Add a related skillFree Scope 1 Carbon Accounting Course

    Focus: Recognizing common categories of Scope 1 emission sources · Distinguishing activity data from an emission factor

    Intermediate

Compare course focus, level and study time
Compare the published course outlines. A lower level is a preparation option, not a required prerequisite.
Course Level Focus Study time
This course — Free Maritime Carbon Capture Course: Ship Systems, Port Transfer and Feasibility Questions All Levels Recognize capture, liquefaction, transfer and storage as connected stages. · Distinguish onboard equipment questions from port and storage-infrastructure questions. · Identify cost, energy, safety and scalability as feasibility considerations. 58 minutes (Udemy listing)
Free E-Fuels Course: Aviation, Shipping and Synthetic Fuels All Levels Distinguish major synthetic e-fuel categories · Connect fuel types with aviation, maritime and industrial uses · Recognize the power-to-X production pathway 49 minutes (Udemy listing)
Free Scope 1 Carbon Accounting Course: Sources, Factors and Calculations Intermediate Recognizing common categories of Scope 1 emission sources · Distinguishing activity data from an emission factor · Following the conversion of emissions into carbon-dioxide equivalents 70 minutes (Udemy listing)

Frequently asked questions

Is the reported capture percentage guaranteed for every ship?

No. It is a supplier-reported installation result, not a universal performance or lifecycle-reduction guarantee.

Does the course approve an onboard system for operation?

No vessel approval, engineering specification or operational certification was established.

Is special software required for initial study?

The source lists no mandatory simulation package; a conceptual paper-based chain can support introductory reflection.

Checked on 28 October 2026 using the public course details and syllabus. Coursya has not watched every lesson or tested full playback. New free enrollments do not include a Udemy completion certificate, instructor Q&A or direct messages.

Share this course

Questions & discussion

Share a useful question or correction. Comments appear after moderation. Please avoid personal or sensitive information.

Add to the discussion

Your email address will not be published. Required fields are marked *