Udemy

Free KiCad Course: From a Schematic to PCB Fabrication Files

A circuit diagram explains connections, but a printed circuit board also needs physical decisions: where parts sit, how tracks reach them and what the manufacturer will receive. Niklas Wennerstrand’s Learn KiCad. Printed Circuit Board Design. introduces that transition through a compact sequence of practical software demonstrations. It is a useful orientation for makers who want to understand the stages of a board-design project.

Original navy white and lime Free KiCad Course cover with a conceptual PCB, layered board panels and a footprint tile, W Coursya and Niklas Wennerstrand; no people.
Free learning access

Listed as Free on Udemy when checked on 7 November 2026. No coupon or subscription trial is required for the listed lessons. Enrollment needs a Udemy account; availability can change.

About this course

A circuit diagram explains connections, but a printed circuit board also needs physical decisions: where parts sit, how tracks reach them and what the manufacturer will receive. Niklas Wennerstrand’s Learn KiCad. Printed Circuit Board Design. introduces that transition through a compact sequence of practical software demonstrations. It is a useful orientation for makers who want to understand the stages of a board-design project.

The free English course contains eight videos in one section, with a combined duration of one hour, twenty-eight minutes and thirty-seven seconds. Its Beginner label describes the software introduction. Familiarity with basic electronic components will help you make sense of the design choices, and this short course should not be treated as a substitute for circuit analysis or electrical engineering foundations.

Official course Learn KiCad. Printed Circuit Board Design.
Created by Niklas Wennerstrand
Platform Udemy
Language English
Level Beginner
Listed duration 88 minutes; 8 lectures across 1 sections
Completion terms Not included with a new free enrollment

What you’ll learn

Follow the movement from schematic symbols and connections to component footprints, placement and routing. Explore silkscreen, copper pours and mounting holes, then see how custom symbols and footprints fit into a library. Understand why Gerber and drill outputs need their own review before you send a design to a manufacturer.

Skills you’ll gain

  • Schematic-to-board reasoning
  • Symbol and footprint distinction
  • PCB placement and routing awareness
  • Silkscreen and copper-zone concepts
  • Custom library organization
  • Fabrication output review

Begin with a readable schematic

The opening lesson starts a project and builds a schematic through component placement, annotation and wiring. A helpful way to follow it is to name what each action changes. Annotation gives components identifiable references; wiring records intended electrical connections. The schematic is your account of the circuit, so a clear drawing matters even before you begin arranging anything on a board.

Connect circuit meaning with physical parts

The next demonstration connects the schematic with the PCB through netlists and footprint association. A symbol expresses a component’s circuit role, while a footprint describes the physical pad arrangement used on the board. Matching these correctly is more than choosing a shape that looks plausible. The part you intend to use, its package and its pin numbering must agree with your design.

Translate the historical workflow

The recordings were last updated in May 2014, so their interface and transfer workflow are historical. Current KiCad provides Update PCB from Schematic, commonly accessed with F8, to bring schematic changes into the board. Use the course to understand the relationship between the two representations, and consult the documentation for your installed version when following menu paths or setting up libraries.

Make placement a deliberate choice

Board placement and routing turn connectivity into a physical arrangement. As you observe this stage, ask where a connector needs to be accessible and which connections must reach each component. A route that fits visually is only one part of the decision. Real designs also depend on electrical requirements, clearances, the selected components and the capabilities of the board manufacturer.

Include markings and mechanical fit

The silkscreen and copper-pour lesson introduces another distinction: readable markings and conductive areas have different purposes. Text needs to remain useful on the finished board, while copper zones need the intended electrical connection and spacing. The separate mounting-hole lesson brings mechanical fit into the project. Treat the demonstrated screw size as an example; establish the hole type, finished dimensions and tolerances for your own hardware and supplier.

Check the parts you create

Two lessons then introduce making a component library and creating a PCB footprint. This helps explain what to do when a suitable library item is missing, but creating an item also creates a checking responsibility. Compare the physical dimensions and pin assignments with the component documentation. An attractive footprint preview alone cannot establish that the purchased component will fit or connect correctly.

Keep library references understandable

The short search-path lesson shows how the older software locates a custom footprint library. Modern KiCad uses separate symbol and footprint library tables, with global and project-specific entries. Keeping a project’s custom libraries organized makes it easier to understand which definitions it relies on. Revisit the current library configuration guidance instead of assuming the old search-path screen will appear unchanged.

Review the exported board

The final and longest lesson prepares manufacturing outputs, including Gerber and drill files, and discusses reviewing them. These files communicate different aspects of the board to fabrication. Inspect the exported result and follow the chosen manufacturer’s requirements rather than assuming that an export command guarantees acceptance. Design-rule checks help identify specified classes of problems; they do not prove that a circuit will function correctly.

Practise the sequence before ordering

For an optional study exercise, describe a simple unpowered board on paper: list its intended components, identify their packages, sketch connector positions and write down the files you would expect to review. Then explain one check at each stage from schematic to fabrication output. This is an editorial exercise, not a supplied assignment, and it does not require ordering or powering hardware.

Plan the next learning step

KiCad is free and open source, and the course lessons are free to view. Components, fabrication, assembly and other optional practical work can involve separate costs. Expect an introduction to a design workflow, followed by further study and verification for real projects. Completion does not promise a certificate, a professionally validated board or readiness for every manufacturing process.

Enroll Now ↗

Related courses for your next step

Frequently asked questions

Does this course use the current KiCad interface?

Its last update is May 2014. Use current KiCad documentation for present-day menu paths, schematic-to-board updates and library configuration.

Will I need to buy a circuit board to study?

You can study the free lessons and plan a design without ordering hardware. Fabrication, components and assembly are separate practical costs.

Does a successful design-rule check prove the circuit works?

No. It checks the configured rules and supported error conditions. Circuit behavior, component suitability and manufacturing requirements still need appropriate verification.

Share this course

Questions & discussion

Share a useful question or correction. Comments appear after moderation. Please avoid personal or sensitive information.

Add to the discussion

Your email address will not be published. Required fields are marked *