
Listed as Free on Udemy when checked on 7 November 2026. No coupon or subscription trial is required for the listed lessons. Enrollment needs a Udemy account; availability can change.
About this course
Writing a hardware description is one part of an FPGA project. You also need to decide what the circuit should do, test that behavior in simulation, connect the design to a particular device and investigate what happens on the board. This free VHDL FPGA design course follows that sequence through a small worked example, making the relationship between those stages its main attraction.
SURF VHDL presents the English-language course at beginner level, with Boolean algebra and basic digital electronics as prerequisites. Its three current sections contain seven videos totaling 65 minutes and 39 seconds, plus one short article entry. The focus is a first implementation workflow using ModelSim, Quartus II and a DE0 Altera board. It is a practical introduction for learners who already have some digital-logic background.
| Official course | How To Implement Your First VHDL Design on FPGA |
|---|---|
| Created by | SURF VHDL |
| Platform | Udemy |
| Language | English |
| Level | Beginner |
| Listed duration | 65 minutes; 8 lectures across 3 sections |
| Completion terms | Not included with a new free enrollment |
What you’ll learn
Follow a design from hardware architecture to VHDL code and a simulation testbench. Recognize the roles of ModelSim scripts, a Quartus II project and board pin assignments. Study how a problem found during board testing leads to debounce logic and another simulation-and-test cycle. Explore the purpose of TextIO for exchanging data with simulation files.
Skills you’ll gain
- Hardware architecture planning
- VHDL workflow awareness
- Testbench preparation
- Simulation script reading
- FPGA pin assignment awareness
- Debounce logic investigation
Connect the stages of a small design
The opening material introduces the implementation sequence, followed by a lesson on starting a good digital design. This is a useful place to separate the intended behavior from the mechanics of a particular tool. Before looking at code, write down what the inputs mean, what outputs should change and which situations deserve a test. That preparation helps explain why a design is organized as it is.
The description mentions a separate VHDL Syntax section, but the current visible curriculum contains only Intro, VHDL Course and BONUS. A dedicated syntax section is not listed there. Approach this as a guided implementation example rather than a complete reference for the language. If entities, architectures or signal assignments are unfamiliar, allow time for separate introductory study instead of expecting an additional section to appear.
Use a testbench before reaching the board
The ModelSim lesson explicitly covers setting up a VHDL testbench, simulating the design and creating a simulation script. These activities let you exercise selected behavior and inspect the resulting signals before programming hardware. A passing simulation supports the cases that were actually tested; it does not automatically demonstrate correct physical connections or validate every possible input sequence.
The next lesson moves into Quartus II: creating a project, implementing the code on an FPGA, setting the pin-out and creating a script file. Pin assignments belong to a particular board and device. When following an older example, identify those dependencies before attempting to reproduce it. Simulation, FPGA implementation and a board test answer different questions, even when they use the same design files.
Learn from the correction cycle
The board-testing lesson introduces a problem, and the following lesson adds debounce logic to filter unwanted external input pulses. The course then returns to implementation and testing with the revised design. This sequence gives the example a useful debugging thread: observe a problem, make a targeted change and check the result again. Debouncing is one specific technique, not a substitute for all timing or input-synchronization work.
The bonus introduces TextIO for reading input stimuli from an external file or exporting simulation results. Its place here is testbench file handling; ordinary simulation file operations should not be assumed to become physical FPGA hardware. The separate article points to an ebook containing ten design rules. The article and six listed supporting resources are separate from the seven recorded videos; the article entry’s seven-second estimate should not be treated as a video lesson or the time needed to study the ebook.
Plan around the recorded tools
The course page reports a July 2017 update, while its description separately notes a caption update in April 2018. Expect differences from current software. Altera currently lists Quartus Prime Lite with no license fee or key requirement; Questa FPGA Starter has no license fee but does require a license key. Those distinctions do not establish compatibility with this recorded project, your computer or a different board.
Viewing the lessons is free. A development board, computer and any separately required software or licenses are not supplied by the course. For an editorial study exercise, draw a simple workflow showing architecture, code, testbench, implementation and board testing. Beside each stage, record its inputs, the evidence it produces and one unresolved question. Use that map to organize learning without claiming a completed hardware build, production-ready design or professional qualification.
Check current Altera licensing: Compare edition-specific license and account requirements before choosing tools.
Related courses for your next step
- Build a complementary electronics skillFree KiCad Schematic and PCB Course
Explore a separate workflow for schematics and circuit-board layout.
See course details
- Explore digital-logic foundationsComputer Architecture and Digital Logic
Review a separate course on the logic behind computing systems.
See course details
Frequently asked questions
Do I need prior electronics knowledge?
The course asks for Boolean algebra and basic digital electronics. It is labeled beginner, but the current curriculum does not contain the separate VHDL Syntax section mentioned in the description.
Are the FPGA board and all software included?
No. The recorded lessons are free to view; hardware and software access are separate. Check current tool licensing, supported devices and system requirements.
Does simulation prove the design will work on hardware?
Simulation checks the modeled cases. Physical board connections, device implementation and actual testing require separate attention; no completed build or production qualification is promised.
Questions & discussion
Share a useful question or correction. Comments appear after moderation. Please avoid personal or sensitive information.