
Listed as Free on Udemy when checked on 9 November 2026. No coupon or subscription trial is required for the listed lessons. Enrollment needs a Udemy account; availability can change.
About this course
A small embedded application becomes more manageable when its timing, sensing and movement code have clear boundaries. This free ARM Cortex-M course uses robot-related modules to introduce that way of thinking, alongside bare-metal C, assembly language and peripheral drivers. It gives you several connected programming topics to study without hiding the limits of the larger project.
Israel Gbati teaches the English-language material using the TM4C123 Tiva C LaunchPad and Keil uVision 5. The listing says no prior embedded-systems programming knowledge is assumed, so Coursya maps this introduction to beginner level. Expect detailed register-oriented examples, however. The instructor explicitly states that the intended robot project is incomplete. Treat the available lessons as modular embedded-systems training, not a complete start-to-finish autonomous-robot build.
| Official course | ARM Cortex-M : Modular Embedded Systems Design (FREE!) |
|---|---|
| Created by | Israel Gbati |
| Platform | Udemy |
| Language | English |
| Level | Beginner |
| Listed duration | 455 minutes; 66 lectures across 13 sections |
| Completion terms | Not included with a new free enrollment |
What you’ll learn
Explore requirements, modular design, call graphs, data-flow graphs and flowcharts before studying Cortex-M assembly and embedded C. Follow examples involving GPIO, memory and debugging views, general-purpose timers, event counting, input capture, interrupts and PWM. Connect these ideas with separate sensing, servo and motor-driver modules.
Skills you’ll gain
- Modular firmware planning
- Cortex-M assembly foundations
- Embedded C organization
- Register-oriented debugging
- Timer and interrupt concepts
- Peripheral driver analysis
Begin with responsibilities and interfaces
The opening lessons introduce a requirement document and distinguish several ways to represent a system. A call graph emphasizes which routine invokes another; a data-flow view emphasizes the information moving between parts. A flowchart then describes decisions and execution order. Keeping these views separate can help you explain a design before attempting to implement every peripheral at once.
The robot theme supplies a concrete organizing idea: a sensing module gathers information, a neck module positions a servo, and a limbs module controls movement. These names are useful as examples of responsibility boundaries. They do not prove that the full integrated robot, every planned behavior or all mechanical assembly steps are delivered in the available recordings.
Connect source code with the debugger
The assembly primer introduces instruction structure, directives, selected opcodes and logical operators, then develops a small GPIO example. The embedded-C primer moves into a counter, debugger views, memory, disassembly and CMSIS-oriented project organization. Studying both gives you a way to ask how a source-level operation relates to registers and memory, rather than treating compilation as an unexplained final step.
Notice the distinction between a project header, a function implementation and the hardware registers that a function accesses. The CMSIS examples provide context for organizing declarations and device information. When adapting such material, use the documentation for the exact microcontroller and toolchain; shared Cortex-M architecture does not make every peripheral register map interchangeable across boards.
Use timing as a shared foundation
The longest section concentrates on timers. Its sequence moves through one-shot and periodic operation, event counting, interval measurement and interrupt programming. The ultrasonic examples connect elapsed time with a measurement, while later driver lessons use timing within a larger module. Follow the units, clock assumptions and configuration choices carefully instead of transferring a numerical setting to different hardware unchanged.
PWM appears in the neck-module lessons, followed by driver functions and a testing discussion. Separate lessons address ultrasonic sensing and motor-control functions. These provide different reasons for dividing an application into interfaces and implementations. Timer-driven interrupt activity is also discussed, but it should not be mistaken for a complete operating-system scheduling course or a verified real-time guarantee.
Turn module examples into a study plan
For an editorial exercise, draw three boxes for sensing, timing and an indicator. Give each box one responsibility, list its inputs and outputs, and describe what should happen if no measurement arrives. Then write a short trace showing how one timing event could lead to an updated indicator. This is an original paper exercise, not an attached course assignment, hardware test or claim that the robot source code has been executed.
The public curriculum lists 13 sections and 66 lectures, with about seven hours and 35 minutes in its duration header. The course card lists two articles and six downloadable resources. The welcome and source-code entries have very short displayed durations; these are not substantial extra video lessons. Their bodies and the downloadable code are not reviewed here, so no completeness or compatibility promise is made for them.
Keep the project and tool limits clear
The material was last updated in October 2019. Board purchases, sensors, motors and any software licensing are separate from free access to the recorded lessons. Keil documents a 32-Kbyte code-and-data limit for its MDK-ARM Lite edition; a free installer is not a promise of unrestricted tools. Check current vendor documentation before following older setup screens. No certification, production readiness or complete robotics qualification is promised.
Check the TM4C123GH6PM device information: Official specifications and device documentation. Check Keil evaluation limitations: Vendor limits for the Lite tool edition.
Related courses for your next step
- Explore digital hardware designFree VHDL Digital Circuits Course
Study a separate hardware-description workflow with gates, adders and state machines.
Intermediate
- Explore a verification-language workflowFree SystemVerilog SOC Verification Course
Compare firmware development with a distinct digital-verification discipline.
Intermediate
Frequently asked questions
Does this course finish the autonomous robot?
No. The instructor explicitly describes the robot project as incomplete. This article recommends the available modular-design and peripheral-programming lessons within that limit.
Do I need to buy hardware to view the lessons?
The listed recordings are free. Reproducing hardware examples requires suitable equipment, which is a separate cost. Software editions and their licensing limits also need checking.
Has Coursya run the attached source code?
No. The public description and curriculum were reviewed, but the attached code, resource bodies and hardware examples have not been executed or validated here.
Questions & discussion
Share a useful question or correction. Comments appear after moderation. Please avoid personal or sensitive information.