Udemy

Free LTspice Course: Explore Circuit Simulation on Windows and Mac

A circuit calculation becomes more informative when you can compare its assumptions with a simulation. This free LTspice course introduces that process through schematic editing, analysis settings and waveform inspection. It is aimed at learners who want to use the software to explore voltages, currents and power in small electrical-circuit examples.

Original Coursya Free LTspice Circuit Simulation Course cover with conceptual circuit components and a waveform display, credited to Jay Pee.
Free learning access

Listed as Free on Udemy when checked on 9 November 2026. No coupon or subscription trial is required for the listed lessons. Enrollment needs a Udemy account; availability can change.

About this course

A circuit calculation becomes more informative when you can compare its assumptions with a simulation. This free LTspice course introduces that process through schematic editing, analysis settings and waveform inspection. It is aimed at learners who want to use the software to explore voltages, currents and power in small electrical-circuit examples.

Jay Pee teaches the English-language course across three sections and 11 listed lectures, with a total duration of about one hour and 59 minutes. It covers Windows and macOS workflows. Although presented for software beginners, the description expects some circuit-theory or analog-circuit background and familiarity with resistors, capacitors and inductors. It explicitly separates this introduction from the instructor’s larger analog- and digital-design courses.

Official course LTSpice (Windows + Mac) – 2hr Course
Created by Jay Pee
Platform Udemy
Language English
Level Beginner
Listed duration 119 minutes; 11 lectures across 3 sections
Completion terms Not included with a new free enrollment

What you’ll learn

Become familiar with the LTspice interface, component placement and analysis controls. Explore DC operating points, source sweeps and transfer functions, then compare transient analysis with AC frequency analysis. Follow examples that check circuit-theory calculations and use voltage and current expressions to inspect power.

Skills you’ll gain

  • Schematic editing foundations
  • DC operating-point analysis
  • Source-sweep interpretation
  • Transient waveform reading
  • AC-response interpretation
  • Simulation result checking

Ask a question before choosing an analysis

The installation and toolbar lessons establish the working environment before the analysis examples begin. As you study them, distinguish the schematic from the simulation directive and from the resulting plot. A correctly drawn-looking circuit is only one part of a useful experiment: component values, source definitions and the selected analysis also determine what question the simulator is being asked to answer.

The DC lesson combines an operating-point example, a source sweep and a transfer-function discussion. These are related but different tasks. An operating point describes a particular DC condition, while a sweep helps you examine how a result changes as a source value varies. Write down the quantity you expect to observe before looking at the output; this makes the graph easier to interpret than an unexplained line on a screen.

Read time and frequency plots differently

The transient lesson uses time-varying sources and capacitor behavior to introduce waveforms over time. The AC lesson instead explores a frequency sweep and magnitude-and-phase plots. Keep the horizontal axis and the meaning of the analysis in view. A frequency-response plot is not simply a transient waveform with a different label, and small-signal AC analysis does not automatically demonstrate large-signal behavior.

This distinction provides a practical study habit: record the source settings, the analysis type and the plotted quantity together. Analog Devices’ current documentation lists separate commands for operating point, DC sweep, transfer function, transient and AC analyses. You can use those categories to organize your notes without assuming that every command available in the current program is taught in this short course.

Compare calculations with the circuit model

A longer example lesson compares circuit-theory answers with simulated node voltages and branch currents, including circuits with independent and dependent sources. The power lesson then considers voltage-current expressions and sign conventions. Use disagreements as prompts to inspect the schematic, reference directions, units and model assumptions. Agreement between a calculation and a simulation is useful evidence about that model; it is not a guarantee that a physical circuit will behave identically.

Parameter notation deserves particular attention. Analog Devices documents that LTspice treats both M and m as milli, while MEG denotes mega. That small difference can change a component value dramatically. This is supplementary vendor guidance for studying the examples, not a claim that the instructor demonstrates every notation rule. No circuit has been simulated, measured or built as part of this article’s review.

Choose a suitable setup without confusing the costs

The syllabus includes a short VPS discussion as well as native macOS installation. A rented remote Windows machine is a separate service with its own costs and terms, not a condition of free lesson access. Analog Devices provides native Windows and macOS downloads and marks LTspice XVII for Windows as end of support. The course lists an April 2026 update but still names XVII in an installation lesson; consult current downloads rather than expecting every old screen to match.

A small experiment to organize your learning

For an editorial exercise, sketch an ideal voltage divider using two equal resistors and a three-volt source. Predict the unloaded midpoint voltage on paper, then describe which analysis would check that prediction and what changing one resistor should do. If you later try the simulation, record your chosen values and results separately. This original exercise is not a supplied assignment or a reported test result. The course offers an introduction to software practice, without promising complete design training, production validation or a certificate with a new free enrollment.

Check current LTspice downloads and support: Official Windows and macOS downloads and learning resources.

Related courses for your next step

Enroll Now ↗

Frequently asked questions

Is the course free even though it mentions a VPS?

The listed lessons are free. Remote hosting is a separate service, and the software vendor also provides native Windows and macOS versions. No VPS purchase is required to view the lessons.

Does it teach complete analog and digital design?

No. The instructor describes this as an introduction to LTspice and directs broader analog and digital design topics to separate courses. Basic circuit knowledge is expected.

Are the simulations proof that hardware is ready to build?

No. Simulation depends on models, values and assumptions. Hardware design and validation require additional work; this review includes no executed simulation or physical test.

Share this course

Questions & discussion

Share a useful question or correction. Comments appear after moderation. Please avoid personal or sensitive information.

Add to the discussion

Your email address will not be published. Required fields are marked *