
Listed as Free on Udemy when checked on 7 November 2026. No coupon or subscription trial is required for the listed lessons. Enrollment needs a Udemy account; availability can change.
About this course
A runoff calculation begins well before you enter a number into modeling software. You first need to understand which land drains toward a location, how that land is used and which assumptions belong in the calculation. This free hydrology course connects those questions through small watershed examples, combining map interpretation, GIS work and introductory runoff modeling.
Tim Clark organizes the material around rural conservation and urban stormwater examples. The intended audience includes soil and water district technicians and entry-level engineers in civil, transportation and agricultural work. The recording draws on a New York conservation setting, so its local data sources and example conditions should remain visible when you consider how the ideas relate to another location.
| Official course | Basic Hydrology |
|---|---|
| Created by | Tim Clark |
| Platform | Udemy |
| Language | English |
| Level | Beginner |
| Listed duration | 148 minutes; 20 lectures across 6 sections |
| Completion terms | Not included with a new free enrollment |
What you’ll learn
Follow a workflow from identifying a drainage area to describing land cover, soil groups and travel time. Compare parallel ArcMap and QGIS demonstrations, then explore the roles of EFH2, TR-20/TR-55 and the rational method. The course closes with introductions to rural and urban example problems, helping you see how the earlier mapping tasks contribute inputs to a hydrological model.
Skills you’ll gain
- Watershed delineation awareness
- Contour map interpretation
- Curve number mapping
- Time of concentration concepts
- Runoff model comparison
- GIS input organization
Trace the area that contributes water
The six sections contain 20 videos totaling about 148 minutes. After an introductory modeling overview, the course works through drainage areas, runoff characteristics, time of concentration, software and example problems. This structure makes it useful to revisit a particular input when a later calculation becomes unclear. Keep a short record of where each input came from rather than treating a model as a box that produces a definitive answer.
The mapping lessons begin with interpreting a drainage area and continue with corresponding ArcMap and QGIS workflows. A New York LiDAR lesson adds a source of terrain information, followed by contour creation examples in both GIS environments. As you study, distinguish the map representation from the site itself. A mapped boundary is an interpretation that may need field checking; the course explicitly includes ground truthing among its learning objectives.
Connect land characteristics to model inputs
The next group of lessons introduces curve numbers, soil information and land-use mapping. In the GIS demonstrations, land-use areas are combined with hydrologic soil groups and their areas are summarized. This creates a concrete connection between a spatial layer and a numerical model input. Pay attention to classification choices and units: a neatly formatted table does not, by itself, establish that the underlying land or soil assumptions are appropriate.
Time of concentration receives a separate section, with rural and urban discussions and examples of calculating average watershed slope. Use these lessons to identify the information a selected method requires. Avoid treating one travel-time estimate or one set of coefficients as a universal answer for every catchment. Recording the method, source data and assumptions makes it easier to explain why two analyses may produce different results.
Compare methods within their limits
The software section introduces EFH2 and HydroCAD, including a HydroCAD example using the rational method. These approaches are presented together for comparison, but their inputs and application limits differ. NRCS guidance describes limits for its small rural watershed procedures and separates snowmelt and other special situations from that scope. For real projects, consult the applicable current technical guidance and qualified engineering review rather than using a training example as design approval.
The final videos introduce a rural laneway culvert example and an urban site. Their descriptions refer to written instructions, answer discussions, spreadsheets, shapefiles and model files. The listing advertises 15 downloadable resources. These supplementary materials are distinct from the video explanations; this introduction does not reproduce their contents or promise that a particular file will run unchanged in your environment.
Plan your study around the available tools
The recording was last updated in March 2022 and includes legacy ArcMap demonstrations. Esri retired ArcMap in March 2026. QGIS is an open-source alternative shown in parallel lessons, although current interfaces and plugins can differ from the recording. ArcGIS licenses and extensions are separate from free access to the course videos; the lessons should not be read as an offer of those licenses.
HydroCAD describes its free Sampler as allowing projects of up to five nodes to be created and saved, with a 60-minute limit per session. A full program license is separate. Before following a practical example, check the current software requirements. For an optional study exercise, draft an input register listing the drainage boundary, land cover, soil data, units and unresolved assumptions. This is an editorial practice suggestion, not an advertised assessment, certification or professional design deliverable.
Check the ArcMap lifecycle: Read the current vendor retirement and migration notice. Check HydroCAD Sampler limits: Review the current evaluation program limits.
Related courses for your next step
- Explore mapping conceptsFree Soar Mapping Course
Review a separate introduction to imagery and mapping.
Beginner
- Explore soil contextFree Soil Carbon Farming Course
Consider a separate introductory perspective on land and soil.
Beginner
Frequently asked questions
Is this suitable for someone new to hydrology?
The course introduces small watershed modeling for technicians and entry-level engineers. Following the GIS examples also requires working with software and spatial data.
Are all the software licenses included?
No. Free access to the listed videos is separate from ArcGIS licenses and extensions. QGIS is open source; HydroCAD Sampler has its own limits and a full HydroCAD license is separate.
Does completing the course authorize a drainage design?
No professional authorization or design approval is established by watching these lessons. Actual projects require appropriate site information, applicable guidance and qualified review.
Questions & discussion
Share a useful question or correction. Comments appear after moderation. Please avoid personal or sensitive information.