
Listed as Free on Udemy when checked on 7 November 2026. No coupon or subscription trial is required for the listed lessons. Enrollment needs a Udemy account; availability can change.
About this course
Choosing a way across a stream involves more than providing a convenient route between two fields. Water movement, bank stability, maintenance and the passage of aquatic organisms all affect the comparison. This free stream crossing course helps conservation technicians organize those questions while studying agricultural examples of fords, culverts and bridges.
Tim Clark presents the material around New York NRCS Standard 578. Three sections contain nine videos totaling approximately 73 minutes, two separate reading items and an open-book quiz. The course connects background hydrology and channel behavior with crossing alternatives, then introduces a project site. It is intermediate study for learners with relevant technical foundations; it does not replace a current standard, site investigation or professionally reviewed design.
| Official course | Stream Crossing Design (NY NRCS Standard 578) |
|---|---|
| Created by | Tim Clark |
| Platform | Udemy |
| Language | English |
| Level | Intermediate |
| Listed duration | 73 minutes; 11 lectures across 3 sections |
| Completion terms | Not included with a new free enrollment |
What you’ll learn
Connect runoff estimates, channel geometry and flow depth to the questions behind a crossing proposal. Compare at-grade arrangements, culverts and bridges, consider how fencing interacts with a crossing, and recognize the role of aquatic passage. Use the project introduction to distinguish the calculations, drawings and supporting references needed to explain a design choice.
Skills you’ll gain
- Crossing alternatives assessment
- Channel behavior reasoning
- Shear stress concepts
- Hydraulic input review
- Aquatic passage awareness
- Design documentation planning
Bring the hydrology foundations
The opening section assumes basic hydrology and stream geomorphology knowledge, plus experience with culvert hydraulics. Its background material points to EFH2, TR-55 and stream-intervention references. These are distinct parts of the learning context: estimating runoff is different from understanding how a channel responds to flow. Identify which question a reference addresses before applying its output to the next stage of an example.
The rock-sizing discussion introduces shear stress, and the HEC-RAS lesson connects flow-depth analysis with surveyed channel information and a discharge estimate. As you follow the example, keep input sources and units visible. A model result depends on the cross section, slope, flow assumptions and other selected parameters. The return period used in a recording is an example choice, not a universal requirement for every location or project.
Compare what each crossing changes
The at-grade lessons consider concrete cattle slats and rock arrangements with or without cellular confinement. Use this comparison to examine how the crossing interacts with the bed and banks, what traffic it must accommodate and what maintenance questions remain. The fencing lesson adds another practical connection: controlling access also requires considering a fence where water and debris move through the crossing area.
The culvert lesson discusses installation issues as a companion to a separate HY-8 course. It is not a complete substitute for learning culvert hydraulic analysis. The bridge lesson introduces agricultural examples and emphasizes site-specific engineering input. Comparing alternatives should therefore include the information and expertise required to evaluate them, alongside their initial cost or apparent construction simplicity.
Read the references as working documents
The standard-reading item and quiz make reference use part of the course structure. The recording was last updated in March 2022 and includes an older update about concrete ford details. Treat such dimensions and historical requirements as material to check against the applicable current documents. NRCS directs users to state-specific Field Office Technical Guides rather than using national practice standards directly for planning, design or installation.
Current New York DEC guidance also emphasizes stream continuity and the effects of poorly sized or placed crossings on flow, erosion and aquatic movement. Its public page links to December 2024 bridge and culvert guidance. A learner should identify the relevant current review and permitting pathway before treating an educational sketch as a proposal. This course summary does not establish that a particular crossing meets those requirements.
Build a reasoned study comparison
The project section introduces a site and describes hydrologic and hydraulic calculations for a simple cross section, together with a design sketch and supporting packet. The actual project files, standard PDF and quiz questions are not evaluated here. Do not assume that instructor feedback arrangements described in the recording remain available, or that completing an exercise provides professional authorization.
For an editorial study exercise, make a comparison sheet for a hypothetical crossing. List the access need, known site observations, missing data and questions for a qualified reviewer under each alternative. Leave dimensions unresolved where evidence is missing. This exercise helps separate an attractive concept from a justified design. Viewing the recorded lessons is free; software access, fieldwork and professional design services are separate from that offer.
Find current NRCS stream crossing references: Locate the national reference page and links to state guidance. Read New York DEC stream crossing guidance: Explore stream continuity concerns and current guidance links.
Related courses for your next step
- Review runoff estimation foundationsFree Small-Watershed Hydrology Course
Study a separate introduction to watershed runoff reasoning.
Beginner
- Explore agricultural roof-water collectionFree Roof Runoff Course
Compare the planning questions behind gutters and drip trenches.
Beginner
Frequently asked questions
Is this a beginner course?
The source identifies it as intermediate and lists basic hydrology, stream geomorphology and intermediate culvert hydraulics experience as preparation.
Are all eleven lectures videos?
No. There are nine videos totaling 73 minutes and one second, plus two reading items with estimated durations and a separate open-book quiz.
Can I use a course sketch as an approved construction design?
No approval is promised. Actual work requires current applicable criteria, site-specific investigation, appropriate professional review and any required permissions.
Questions & discussion
Share a useful question or correction. Comments appear after moderation. Please avoid personal or sensitive information.